Installation variant B
Step 3 from 4
Glue in helmet adapter with tabs
Place the helmet adapter (2) in the forehead area of the helmet between the inner shell (4) and the sun visor (5). At the front of the helmet adapter is a mark (6) that should be on an imaginary line between the center of the helmet and the center of your face. Make sure that the helmet adapter does not collide with the sun visor. Press the helmet adapter evenly onto the helmet with the adhesive pads.
If individual tabs in the gap of the helmet collide with the material of the helmet, you can break away up to three tabs (4) at the perforated line (5) of the helmet adapter. Smooth out the fractures with a file or scissors.
Check helmet adapter
Check whether the helmet adapter is correctly attached to the helmet. To do this, attach the head-up display module to the helmet adapter using the magnets. The module must be fully attached to the helmet adapter without a visible gap in between.